EN
Connection Kit 1700 Mbit/s
1. EASY SETUP
Connect your devices as shown.
Fig. 1
PLEASE WAIT 3 MINUTES
Fig. 2
2. USING HIGH-SPEED WI-FI
Connect mobile devices to the new wireless network.
Fig. 3
Find the info label on the bottom side:
1. Name (SSID)
2. Password
3. ADDI NG MORE CONNECTIONS
To extend an existing network, install an additional
STRONG Wi-Fi Connection Kit.
Fig. 4
PLEASE WAIT 3 MINUTES
Fig. 5
4. CHANGING WIRELESS SETTINGS
Open the web browser and type
http://kit1700duo.local
to the address bar.
Fig. 6
Change SSID and password in the quick setup wizard
menu. Changing the wireless settings on one access
point will automatically distribute the new settings to
the other one.
Fig. 7
LED
STATUS
EVENT
Power
Off
No power.
Solid white
Power on.
Flashing white
Firmware upgrade in progress
Wireless
Solid green
Wireless connection established (good signal strength). If
configured as an Access Point: ready for connection.
Flashing green
Wireless connection is being established.
Solid red
Wireless connection established (poor signal strength).
Flashing red
Wireless connection failed.
Power and
Wireless
Fast flashing
Factory reset button is pressed.
LEGEND
a. Internet
b. Modem
c. Receiver
d. Additional unit
e. Check
f. Success
g. Out of range
GENERAL DATA
Power consumption in operation: max. 12 W
Power consumption in standby: 3.5 W
Operating temperature:
0 °C ~ +40 °C
Storage temperature:
-40 °C ~ +70 °C
Humidity range:
0% ~ 90%
YM.AP.4820.UM.EU.F00
