18
PART 1 • English
WARnIng!
Formatting will permanently delete ALL data stored on the connected device.
Please make a backup copy of all data you wish to keep before entering the
HDD Format
menu. STRONG cannot be held responsible for loss of data
from USB devices used with this receiver.
Press ok to proceed, select
FAT
or
Cancel
, or press EXIT to leave without formatting.
It is possible to use USB storage devices already formatted in NTFS.
Press EXIT to leave this menu.
7.6.3 dvR setting
This menu allows you to configure settings for Timeshift, recording and playback.
Select
DVR Setting
in the
Media
menu and press ok to enter.
Use
pq
to move the highlight and
tu
to change settings.
Timeshift:
Select between
Auto
,
Pause
or
Off
. When
Timeshift
is set to
Auto
it will
automatically start every time after tuning to a channel. When
Timeshift
is set
to
Pause
it will start only after pressing the YElloW/
2
button. Select
Off
to
deactivate Timeshift.
Step to:
30 sec
to
30 min
. Set the time step you like to jump forward by pressing 4
during playback of recorded files. This will only work when the info banner is
displayed on screen. If it is not, press Info.
Time Shift to Record:
If set to
On
the timeshifted part will be included in your recording when you
start to record the current programme.
PS Record:
Select between
On
or
Off
. When
Off
is selected, recordings will also
include subtitles and Teletext (when available). Record to PS mode
On
allows recordings without these extras which will need less space on your
USB device.
Press EXIT to leave this menu.
7.6.4 Remove usb device safely
Select
Remove USB device safely
from the tools menu and press ok. The receiver will display a
message indicating that you can safely remove your storage device from the receiver.
noTE:
After performing this function, the USB device is no longer accessible from
your receiver. To gain access to your storage device again, re-insert it or switch
the receiver to standby and on again.
8.0 TRoublEshooTIng
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline. Do NOT try to open or disassemble the receiver. It may cause
a dangerous situation and warranty will be void.
Problem
Possible cause
What to do
LED indicator not lit
Mains lead unplugged
Check mains plug
