Lifetime Limited Warranty
Strong™ Mounts have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components
found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to prod-
ucts which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned
to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).
For Technical Support call 1.866.838.5052
Lifetime
110713
SM-PAD-LIFT
Strong™ Lift-off Mount for iPad
®
with 90 Degree Rotation (Black)
ATTACHING THE MOUNT TO THE IPAD
1. Remove the 4 thumbscrews
to separate the bezel from
the base plate.
2. Place the iPad on the bezel, face
down as shown. Ensure the iPad
fits snuglyin the bezel. (For iPad 2
installation, see the additional manual).
3. Ensure the rubber bumper is
seated properly on the base plate.
4. Place the base plate over the bezel
and iPad.
5. Secure the base plate to bezel and
iPad with the 4 thumb screws.
(Optional phillips head #6-32 x 3/8”
screws can also be used to hold the
base plate to the bezel).
FINAL ASSEMBLY
1. Slide the lift off plate into the
wall plate. Make sure the lift
off plate is seated properly.
2. Secure the lift off plate to the
wall plate using the lock screw.