6.2 Add accessory (bluetooth)
This menu allows you to open the Bluetooth search detection
ON
or
OFF
, to setup new connections
to other Bluetooth devices.
If you like to make connection you need to open on both devices this function. With a confirmation
by numeric key you make a secured connection.
6.3 Display
Here you can set your
Screen resolution
,
Screen position
and
Daydream.
6.3.1 screen resolution
In this menu you can select your preferred HDMI output resolution which is supported by the
connected TV. The
AUTO
mode automatically selects the best output resolution of the combination
(so called 'handshake').
6.3.2 screen position
Select
Screen position
if the size of the displayed screen is a bit too large or too small for the
connected screen.
6.3.3 Daydream
You can set your
Daydream
screen in
None
or
Colours
.
Choose the period of inactivity to start
Daydream
: (
5, 10, 15, 30, 60 minutes, Never
).
When to sleep: Screen turns OFF after this period of inactivity: (
30minutes, 1, 3, 6, 12 hours, Never
).
6.4 sounds
In this menu you can setup the correct audio output setting if you like to use Dolby audio to connect
to a digital amplifier.
System sounds
: Select
On
to hear every time a click of remote buttons as confirmation. Select
Off
for no click sound.
Digital sounds
:
The selection
HDMI
sends Dolby audio. The selection
PCM
gives only Stereo
to all outputs.
6.5 Language
Select the OSD language which shall be used for the menus on screen.
6.6 storage & Reset
This menu gives you an overview of your storage device.
You can also do a Factory data reset.
6.6.1 storage
Here you get an overview from the used space on your storage device.
You can also clear your cached data for all apps in
Cached data
.
13
