Strong SRT 24HC4023, User Manual

5. 

AV IN

 3.5 mm female jack entry for composite video and left/right audio 
connection.

6. 

HDMI

 Connect HDMI input signal from a signal source such as DVD, Blu-ray player 
or game console.

7. 

S/PDIF (coaxial)

   Use an RCA cable to connect your TV to a compatible digital amplifier or 

Home theatre set.

8. 

SATELLITE IN

Connect a satellite dish to the TV for searching programmes.

9. 

ANTENNA IN

 Connect a terrestrial antenna or cable connection from your provider to the 
TV for searching programmes.

NOTE:

The 12V DC input port of this TV set, is only intended for stable DC voltage. 
The input voltage range is 11.25V ~ 13.75V. User cannot use power input 
beyond the voltage range, otherwise it may damage the TV set. In no case 
both 12V connector and 230V power shall be connected to the TV at the 
same time. It could damage it.

2.5 Remote control

Fig. 4

1. 

q

Press to turn the TV on or standby.

2. 

!

Press to mute or restore the volume.

3. 

0 ~ 9

Choose channel directly.

4. 

ECO

Screen brightness modes for energy saving

5. 

EPG

Press to display the current EPG information in DTV mode.

6. 

VOL +/-

Adjust the volume up or down.

7. 

(-/--)

Change the maxium input programme digit

8. 

CH +/-

Change programmes up or down. Big steps in Channel list.

9. 

INFO

Display information about the current source.

10. 

SOURCE

Select the input source mode. SAT/ DVBT/HDMI…

11. 

RETURN

Press to go back to previous viewed channel.

12. 

MENU

Open the menu options. Step back in some menu options.

13. 



Exit the current menu or page.

14. 

pqt

u

Navigate the menu or select channel list group

15. 

OK

Confirm the selection or to call channel list.

16. 

TEXT

Press to enter or exit the Teletext menu.

17. 

SUB

Enable/disable subtitles in DTV/USB mode.

18. 

LIST

Press this button to call one or return to channel list 

 Use 

/

 button select one.

19. 

FAV

Press to view your assigned favourite list.

20. 

COLOUR BUTTONS 

Press to execute the prompt function in TV or DTV menu mode.

21. 

AUDIO

 Press to select available audio languages. Selecting audio description, a 
narrator will describe what is happening on the screen for blind or visually 
impaired viewers. Press again to turn it off (depending on broadcast).

2.6 Installing the batteries

Fig. 5

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the 
polarity markings inside the compartment.

6