Use this menu to change all the settings of the TV and to make a new channel scan. To start the
scanning, select
Start
at the end of the list and press
oK
.
All your old settings will be replaced with the new settings.
noTe:
For more information about
Settings
in this menu please refer to chapter
3 first Time installation
.
Restore factory Default
Press
pq
to select
Reset
, then press
oK
to enter the sub-menu.
If you are sure to reset, press
Yes
to reset.
noTe:
User data on this TV will be completely lost after operating this feature.
software Upgrade (Usb)
Connect a USB device with upgraded software to upgrade the TV system.
software Version
Your current software version is displayed.
4.6.1 Time settings
Press
pq
to select
Time Settings
, then press
oK
or
u
to enter the sub-menu.
osD Time
Press
pq
to select
OSD Time
, press
t
u
to select the duration time for displaying the info bar on
screen, available settings are:
Off, 10seconds, 20seconds, 30seconds, 60seconds
.
sleep Timer
Set a timer for the TV to turn off automatically.
Press
pq
to select
Sleep Timer
, press
t
u
to select. Available settings are:
Off, 5 min, 15 min, 30 min,
60 min, 90 min, 120 min, 240 min
.
Auto sleep
Auto Sleep
helps you reducing power consumption. When set to
3 Hours/4 Hours
and
5 Hours
, the
receiver will switch to standby if it doesn’t receive any commands during this time. Set
Auto Sleep
Off
to
deactivate the automatic standby function
Time Zone
Select your region to set the correct time.
Press
pq
to select
Time Zone
, then press
oK
or
u
to enter the sub-menu.
Use
pq
to select your country and consequently your time region. Then confirm with
oK
.
Autosync Time
When
Auto Sync
is set to
On
the TV will display the time provided by the broadcaster. If you choose to set
it to
Off
you will be free to set the time you prefer by changing
Date
and
Time
.
14
English
