background image

 

This menu only shows supported fi les.

 

Files with other fi le extensions are not displayed, even if they are saved on the same USB 

storage device.

 

An over-modulated mp3 fi le may cause some sound distortion during playback.

 

This TV supports lyrics display (in English). The maximum number of characters per line is 48.

 

The fi le name of music and lyrics must be the same in order to display lyrics while the music is 

playing.

 

If you want to show the associated lyrics on the screen with the music, you must store these in 

the same folder using the same fi le name with ".Irc" fi le extensions.

6.2.3 Browse photos

Fig. 8

Press 

INFO

 or 

 to display/exit from the menu bar (Fig. 8). Press the 

USB control buttons

 on the remote 

control to do relevant operations.

Play & Pause/Stop/Previous/Next

 Press 

 

2

 to play or pause the playback. Press 

3

 to stop playing. Press 

7

 

8

 

to show the previous or the next picture. Press 

 

 to highlight the icon on 

the control bar, and then press 

ENTER

. The TV will response accordingly.

Repeat

 

 Highlight the icon and press 

ENTER

. You can select 3 diff erent modes: 

None

 

to disable the function, 

1

 to repeat one track only and 

All

 to repeat the entire 

list once it is fi nished.

Info

 

 Highlight the button and press 

ENTER

 to check the information of the shown 

photo.

Rotate

 

 Highlight the icon in the menu bar and press 

ENTER

 to rotate the picture 

90 degrees clockwise or counter clockwise.

Zoom In/Zoom Out

 

 Highlight the icon on the menu bar and press 

ENTER

 to zoom in or zoom out 

of the image.

Move View

 

 When the image is magnifi ed, use this function for convenient check. 

Highlight this icon, press 

ENTER

, then press 

 



 to move the image.

NOTE:

 

 The move function 

 is only available when the image is enlarged.

7.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for 

the problem you are experiencing. If the TV does not work properly after checking it, please contact 

your local service line or STRONG dealer. Alternatively you can send a support mail via our website 

www.strong.tv. 

Problem

Possible cause and solution

No picture,no sound

1.  Check if the fuse or circuit breaker is working.

2.  Plug another electrical device into the outlet to make sure it 

is working or turned on.

3.  The power plug is in bad contact with the outlet

4.  Check the signal source.

14

Summary of Contents for SRT 24HY4003























Reviews: