background image

 

„

Make sure that the SCART/HDMI connections are well shielded and of good quality.

This manual provides complete instructions for installing and using this receiver. The symbols serve as follows.

Warning

 

Indicates warning information.

Note

 

Indicates any other additional important or helpful information.

MENU

 

Represents a button on the remote control or the receiver.

Move to

 

Represents a menu item within a window.

1.4 Accessories

 

„

1x installation instructions

 

„

1x remote control 

 

„

2x batteries (AAA type)

NOTE

 

 The batteries should not be recharged, disassembled, electrically short-circuited or be mixed 

or used with other types of batteries. If rechargeable accumulators instead of batteries are 

going to be used, we recommend using (e.g. NiMH) types with low self-discharge to ensure 

long time operation of remote control.

1.5 Usage of external USB devices

 

„

It is recommended to use USB 2.0 storage devices. If your device is not compatible to USB 2.0 specifications, 

multimedia, recording and Timeshift functions of the receiver might not work properly.*

 

„

If you are going to use an external USB HDD (Hard Disk Drive), please consider that the power specifications may 

exceed the supported output of your receiver (5 V/500 mA). If so, please connect your USB HDD to an according 

external power adapter.

 

„

STRONG cannot guarantee compatibility with all types of USB storage devices.

 

„

It is advised not to store important information on USB storage devices used with the receiver. Always make 

backups of data on your USB storage device before using it with this receiver. STRONG will not take responsibility 

for any loss of information or circumstances caused by loss of information.

 

„

STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on file size, codec, 

bit rate and resolution.

 

„

Please ensure that either the USB device is already formatted to FAT/FAT32, or format the USB device via your 

receiver, refer to chapter 7 for details.

*This user manual describes the full functionality including the recording function and may not be applicable if the software for recording via 

USB has not yet been installed.

5

English

Summary of Contents for SRT 3030


























Reviews: