5.12.1 Enabling or disabling T-Link
Press
Menu
on the remote control, then select
Options > T-Link
.
Press
t
u
to select
On
or
Off
, if this function is turned on,
T
-
Link
option will be available in the
Quick
access
menu which you can enter by pressing the
Option
button on the remote control.
5.12.2 Using one-touch play
With one-touch play, pressing the play button on (for example) your DVD remote control starts
playback on your DVD device and automatically switches your TV to the correct source, displaying
DVD content.
5.12.3 Using system standby
With system standby, pressing the
q
button on (for example) your TV remote control switches your
TV and all connected HDMI devices to standby mode.
NOTE:
Guide Menu
will be available in the sublist of
T-Link
option when
T-Link
function is turned on and CEC devices are connected. With this function,
you can operate CEC devices with a virtual on-screen controller and the TV
remote control.
NOTE:
The CEC functions depend on the devices connected and it is possible that
some devices may not interoperate correctly when connected to this TV.
The user manual or the manufacturer of the problematic devices should be
consulted for further information.
5.13 Common interface
Encrypted digital TV channels can be decoded with a common interface module and a card provided
by a digital TV service operator.
The common interface module may enable several digital services, depending on the operator
and services you choose (for example, pay TV). Contact your digital TV service operator for more
information about services and terms.
5.13.1 Using the common interface module
WARNING:
Switch off your TV before inserting a common interface module. Be sure
to follow the instructions described below. Wrong insertion of a common
interface module may damage both the module and your TV.
Following the directions printed on the common interface module, gently insert the module into the
common interface slot on the TV.
Push the module in as far as it will go.
Turn on the TV and wait for the common interface function to be activated. This may take several
minutes.
14
PART 1
