Noise Reduction
Eliminates noise in the picture. Available choices are
Off, Low, Middle, High,
Auto
.
Dynamic Contrast Enhancement
Available choices are Off/ON. When set to ON, the contrast setting will be
automatically adapted to the ambient light
7.2.1 Contrast/Brightness/Colour Tint/Sharpness
If
Picture Mode
is set to
User
you are able to change the following settings
Press
pq
to select an option, then press
t
u
to adjust.
Contrast
Adjust the highlight intensity of the picture, but the shadow of the picture is
invariable.
Brightness
This function ensures that dark areas of the picture get adjusted. The optimal
setting of this function ensures that you can distinguish details from each
other (in both darker and lighter parts of the picture).
Colour
Adjust the saturation of the colour based on your own preference.
Tint
No function
Sharpness
Adjust the peaking in the detail of the picture.
Backlight
Adjust the backlight to make your picture darker or lighter.
7.2.2 Colour Temperature
In this menu you can change the overall colour cast of the picture.
Press
pq
to select
Colour Temperature
, then press
OK
to enter a sub-menu. Press
pq
to select the
relevant picture effect (DEFAULT:
Cold Normal Warm
).
Cool
lncrease the blue tone for the white.
Normal
Increase the neutral colours for the white.
Warm
lncrease the red colour for the white.
7.2.3 Noise Reduction
In this menu you can filter out and reduce the image noise and improve picture quality. Press
pq
to
select
Noise Reduction
, then press
OK
to enter a sub-menu.
Off
Select to turn off video noise detection.
Low
Detect and reduce low video noise.
Middle
Detect and reduce moderate video noise.
High
Detect and reduce enhanced video noise.
7.3 Sound menu
Sound Mode
Select your favourite sound mode for each input. Choices are
Standard, Music,
Movie, News
and
User
. In
User
mode, you can change the settings. Settings can
be changed in 5 equalizer bands.
Balance
Control the sound balance between the right and left loudspeaker
(earphone).
Auto Volume
Adjust the volume corresponding to the input audio level. Options are ON
and OFF.
12
