background image

Rotate

 

 Highlight the icon in the menu bar and press 

OK

 to rotate the picture 90 

degrees clockwise or counter clockwise.

Zoom In/Zoom Out

 

 Highlight the icon on the menu bar and press 

OK

 to zoom in or zoom out of 

the image.

BGM

 

 Background music: If you additionally saved music files on the very USB flash 
drive, you can playback music files while viewing your photos.

NOTE:

 

 The move function  

 is only available when the image is enlarged.

8.2.4 Browse text documents

Press 

t

 

u

 to select 

Text

 in the main menu. Then press 

t

 

u

 to select the drive disk you choose to watch 

and 

OK

 to enter. Select the file you want to display by using 

pq

 

t

 

u

 and confirm with 

OK

. Quit step by 

pressing 

OK

. Press 

t

 

u

 to select 

return

 and go back to previous menu.

8.2.5 Software update via USB

From time to time you can check if there is an improved software version available. This can be viewed 
and downloaded from our website www.strong.tv. Search the model number on our website's service 
support section. If there is an improved software version you can download the file and copy it to the 
root of a USB device. Then press 

pq

 button to select 

Software Update (USB)

 from the 

SETUP

 menu 

on your TV. Afterwards plug your USB device into the USB slot and press 

OK

 to update the respective 

software. Confirm with 

Yes

 using 

t

 

u

. When the update is completed, remove the USB stick, disconnect 

your device from the main power supply and plug in again.

9.0 TROUBLESHOOTING

Before calling a service technician, review following information for possible causes and solutions for the 
problem you are experiencing. If the TV does not work properly after checking it, please contact your 
local service line or STRONG dealer. Alternatively, you can send a support mail via our website www.
strong.tv.

Problem

Possible cause and solution

No picture, no sound

1.  Check if the fuse or circuit breaker is working.
2.  Plug another electrical device into the outlet to make sure it is 

working or turned on.

3.  The power plug is in bad contact with the outlet.
4.  Check the signal source.

No colour

1.  Change the colour system.
2.  Adjust the saturation.
3.  Try another channel. Black-white programme may be 

received.

The remote control does not 
work

1.  Change the batteries.
2.  The batteries are not installed correctly.
3.  Main power is not connected.

No picture, normal sound

1.  Adjust the brightness and contrast.
2.  Broadcasting failure may happen.

15

English

Summary of Contents for SRT 43UB6203























Reviews: