Strong SRT 5001, User Manual

PART 1 • English

6

2.0 CONNECTION

2.1 Connecting to Terrestrial Antenna

To receive the broadcast signal, the terrestrial antenna cable should be connected 
to the ANT IN connector at the back of the receiver. 

(Fig. 1)

2.2 Connecting to TV and VCR

2.3 Connecting to a Digital Audio Amplifier

Connect your Digital Audio Amplifier with the S/PDIF connector on the back of the 
receiver 

(Fig. 2)

. 

3.0 YOUR RECEIVER

3.1 Front Panel 

Fig. 3

3.2 Rear Panel

Fig. 4

1.  

ANT IN

To connect an antenna for reception of broadcasting signal.

2. 

TO TV

To connect a TV set or to connect an extra receiver.

3.  

S/PDIF (Coax.) 

To connect your receiver to digital audio amplifier.

4. 

USB 

Connects to USB device

5. 

TV SCART

   To connect your receiver with your TV set using a SCART 

cable.

6. 

Power Cord 

 Your receiver requires a voltage of 220 – 240 V AC (Auto-
selectable), 50/60 Hz ± 5 %. Make sure to check the power 
specification before connecting your receiver to the 
wall outlet.

3.3 Remote Control

Fig. 5

1. 

MUTE

Turns the receiver On/Standby

2. 

POWER

Mutes audio output of the receiver

3. 

PAGE+/PAGE- 

Page up/down

4. 

RECALL

Back to previous shown channel

5. 

VOL+/VOL-

 Volume up/down

6. 

MENU 

Opens the main menu/In menu you will get one step back