Strong SRT 5220, User Manual

PART 1 • English

8

EPG

Shows the EPG (Electronic Program Guide) during No-menu state only

0 ~ 9

Channel selection

MOSAIC

Show pictures up to 9 channels on the screen( depends on Broadcaster support)

AV 

Toggle between TV and AV mode

4.0 FIRST TIME INSTALLATION

Make sure your terrestrial receiver is connected correctly to your TV and terrestrial antenna and the 
signal quality is good enough. Confirm the power plug of the receiver is plugged into the wall outlet. Turn 
on the receiver.
It is recommended to perform the first time installation following the Installation Wizard step by 
step. This will help you to easily achieve system configuration and channel installation. If you are a 
professional installer then you can skip the wizard by pressing 

EXIT

 button and set-up the channels using 

the 

Channel Search 

menu.

1.  You are asked to Select a Language out of the list. 

Press 

UP/DOWN 

to choose your language, press 

OK

 to confirm.

2.  The 

Preference Menu 

will appear. 

Please select your 

Country

, 

Antenna Power mode 

and 

Channel numbering

. Press 

UP/DOWN 

to 

select the items, press 

RIGHT/LEFT 

to change the value of the item. If you choose 

BACK

, it 

will go back to the previous menu screen. Press 

OK

 to confirm.

3,  You enter the 

Adjust antenna 

menu. 

Press 

LEFT

/ 

RIGHT

 to select 

Channel No

, adjust your antenna direction and position (if 

necessary) to get maximum levels on the signal level and quality indicators. You can check 
with your dealer on which channels digital terrestrial broadcast is available at your location. 
Move cursor to 

Scan

, press 

OK

 to confirm, The 

Automatic Search 

screen will appear. On 

completing the search, the receiver will save services information automatically and exit to 
normal play state.