Strong SRT 6100, User Manual

32

English

31

7) Add Channels

This Submenu allows you to add channels.
Press on Add Channels. The following menu will be displayed. <Figure 6.3.8>

- Frequency : Select Frequency.

6.3 Channels

8) AV Input Channel

Ү

Your STRONG SRT7000 incorporates an AV Input feature that will allow you to record
from any external video source to the internal HDD, such as Pay TV, Gaming consoles,
Camcorders and many others

Ү

You can connect your external audio/video source either via Component or
Composite Video cables and Audio Left and Right RCA cables 

Ү

To activate the AV In feature press 

, using the arrow buttons highlight Channels

and press the 

button. You will be prompted to enter your PIN (the default PIN

number is ‘0000’) to access this menu.

Ү

Using the arrow buttons highlight AV In and press the 

button, the AV In menu

screen will be displayed

Ү

With AV Input highlighted, using the arrow buttons select ON

Ү

To set the Input Selection, use the arrow down button select Input Select, now using
the 

/ 

arrow buttons select the appropriate connection type. 

Ү

If you have connected your external video source via Component (Red, Green and
Blue RCA cables) select YCbCr

Ү

Video source must be set to 576i when connecting via component.

select CVBS

Ү

Now press the 

button, you will be prompted to save these settings. Using the

arrow buttons select Yes and press the 

button.

The AV Input channel will be added in the channel list at the last position.To access the
AV In channel press the AV IN button on the remote control. You can also access the
AV In channel by pressing the 

and 

buttons until it is displayed or alternatively

press the 

button to bring up the Channel List. And select AV In by pressing the 

button.

6.3 Channels

<Figure 6.3.8>

Press         /           to Change the parameter.

- Channel Name : Press to display Keypad pop-up; Edit a channels name.
- Channel Type : Select among TV / RADIO.
- You can add specific channel of the transponder by setting its PID data (Video, Audio and PCR).
- Video Type : Select the video type (MPEG1/2, H.264).

- Audio Type : Select the video type (MPEG1/2, HE-AAC, Dolby Digital(AC3), MPEG4, ACC,
  Dolby (DD+)).

Ү

If you have connected your external video source via Composite (Yellow RCA cable)