4
English
2.3 Positioning
ᶀ
Ensure the receiver is placed on a stable, even surface.
ᶀ
Do not place heavy objects on top of the receiver.
ᶀ
Install the receiver in a well ventilated location and avoid direct sunlight.
ᶀ
Avoid dusty locations.
ᶀ
Never cover the ventilation holes in the cover of the receiver.
ᶀ
Humidity can occur inside the receiver when moving from a cold to a warm place.
In this case, wait approximately one hour before operating the unit.
3
Safety Precautions
2.1 Safety
ᶀ
Only connect the receiver to a properly installed 100-240V, 50-60 Hz mains socket.
ᶀ
During electrical storms it is recommended the receiver be unplugged from the
mains.
ᶀ
To avoid any risk of fire and electric shock, do not expose the receiver to any
water. If objects or liquids enter the receiver, immediately unplug power from the
mains. Contact a qualified service technician before using the receiver again, or
there may be a risk of electric shock.
ᶀ
Do not open the cover as there is a risk of electric shock.
ᶀ
When the receiver is not in use for extended periods, disconnect the plug from
the mains.
ᶀ
Never use the receiver with a damaged mains cable as there is a risk of electric
shock.
ᶀ
Should the mains cable be damaged, refer to a qualified service technician or
contact an authorized Strong technician to arrange repair or replacement
before using the receiver again.
ᶀ
Do not allow children to use the receiver without supervision.
ᶀ
Always refer maintenance to a qualified service technician or contact Strong for
an authorized representative.
Please thoroughly read the following safety precautions before operating this receiver.
You are required to read all notes, instructions and warnings contained in this User
Manual.
2.2 Safety Precautions
