background image

6.7 EPG (Electronic Programme Guide)

The Electronic Programme Guide is a very useful function that allows you to view event schedules and 
programme information and to mark events/movies for recording. To access the EPG, press the 

EPG

 

button in viewing mode. Use 

pq

 to select a channel and 

tu

 to select an event. Press 

Ok

 to display 

detailed information of the selected event. Use 

EXIT

 to quit the detailed information screen. Press 

RED

 

to access further step functions. Use 

tu

 to select the desired step and 

Ok

 to execute it. Press 

EXIT

 to quit 

the step function. Press 

GREEN

 to set a timer for a selected event. Refer to section 

7.3.4

 for details of the 

timer function.

NOTE: 

 Availability of EPG data depends on broadcast.

6.8 Instant Recording

Your new receiver allows you to make an instant recording of the programme you are watching. Simply 
press 

RECORD

 to start the recording. To enter the duration for the recording, press 

RECORD

 again. Use 

the 

0~9

 buttons to enter the recording time and press 

Ok

 to confirm.

At the beginning of the recording a recording sign will be shown for a short while on the upper left 
corner of your TV screen. To stop the recording, press 

3

. Select 

Yes

 and press 

Ok

 again to stop the 

recording.
You can access the Record Manager via the 

3

 button to find and to playback you made records.

If you not can find your records, make sure that 

Record

 files is selected by pressing the button 

1

. See 

chapter 

7.6.1

 for details.

*Please connect an USB storage device with sufficient free space before you start a recording.

7.0 MaIN MENU

The main menu gives you access to channel lists, settings, timers and multimedia functions. To access 
the main menu, press 

MENU

 in viewing mode. The main menu consists of the following sub menus: 

Edit 

Channel

Installation

System Setup

Tools

 and 

Media

.

Throughout the main menu, 

MENU

 or 

EXIT

 can be used to get back to the previous screen.

7.1 Edit Channel

Use 

pq

 to select 

Edit Channel

 and press 

Ok

 or 

u

 to enter.

Use 

pq

 to highlight the submenu of choice and press 

Ok

 to select.

Press 

EXIT

 or 

t

 to get back to the main menu.

7.1.1 Tv Channel list

In 

Edit Channel

 menu select 

TV Channel List

 with 

pq

 and press 

Ok

 to enter.

Use 

tu

 to change the channel group (assumed you have already set up favourite groups).

Select the channel of choice with 

pq

. Press 

Ok

 to view the selected channel in the preview box.

7.1.1.1 adding channels to favourite lists

Channels from the 

TV Channel List

 can be added to up to 8 different favourite groups. Press 

fav

 in 

TV 

Channel List

 to access this function. The 

FAV

 sign on the top of the screen will move up to indicate that 

the favourite function is selected. Use 

pq

 to select a channel you wish to add to a favourite group. 

When the highlight is on the channel of your choice, press 

Ok

. A list with all available favourite lists will 

now pop up. Use 

pq

 to select the favourite list you wish to add the channel to and press 

Ok

, press 

EXIT

 

to finalize the process. Favourite channels will be marked with a heart symbol. When all changes have 
been made, press 

EXIT

 twice. A confirmation banner will pop up. Select 

Yes

 to save the changes or 

No

 to 

discard.

7.1.1.2 locking channels

Locked channels can only be watched after entering the PIN code. 

(DEfaUlT PIN: 1234)

8

PaRT 1 • English

Summary of Contents for SRT 8201























Reviews: