Problem
Possible cause
What to do
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially
on HD content.
Read/write speed of your USB
device could be too low.
Make sure to use a USB storage device with
sufficient speed and space. Pen drives (‘USB
sticks’) may not support sufficient speed.
9.0 TECHNICal SPECIfICaTIONS
Demodulator
Demodulator:
QSPK, 16/64/256 QAM
DVB-T (EN 300 744), DVB-T2 (EN 302 755)
Transmission mode:
1K, 2K, 4K; 8K, 16К, 32К
Guard intervals:
DVB-T = 1/32, 1/16, 1/8, 1/4;
DVB-T2 = 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4
video Decoder
Profile level:
MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Video resolutions:
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / By Native TV /By
source
Decoding & Video out:
PAL
Aspect ratio:
4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
audio Decoder
Audio support:
AAC/Dolby® Digital Plus*/AC3/PCM
MPEG MusiCam Layer II
Sampling rate:
32, 44.1, 48 kHz
Audio mode:
Stereo, Mono
*Dolby® and the double-D symbol are registered trademarks of Dolby® Laboratories
Tuner
Front End:
DVB-T/T2, UHF & VHF Tuner
Input frequency range:
174 – 230 MHz (VHF) and 470 - 862 MHz (UHF)
Loop through frequency range:
47 - 862 MHz
Input signal level:
-20 ~ -84 dBm
Memory and System
Flash memory:
4 Mbytes
SDRAM:
128 Mbytes
Multimedia
Video playback:
MPEG-1 and MPEG-2 encoded (mpg), VOB, AVI, MKV, TS, M2T, M2TS,
MPEG-4 and MOV*
Audio playback:
MP3 and OGG
Picture view:
BMP and JPEG
*STRONG cannot guarantee the playback of video files although extensions are listed, as it depends on codec used, data bit rate and
resolution (all MPEG codec formats are supported).
Connectors
ANT IN - IEC Female
ANT OUT - IEC Male
TV SCART (RGB, CVBS, Audio L&R)
HDMI
17
English
PaRT 1 • English
