1.3 Equipment Set-up
The installation of your receiver does not require any special skills and can be done by yourself, as
described in chapter
4
. In this case, please follow the instructions.
Refer to the user manual of your TV.
Make sure that the HDMI cable is in a good condition.
Connect one end of a good quality HDMI cable to the HDMI output on your receiver and the
other end to the HDMI input of your TV.
If you use TV SCART connection, use then well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. If you are unable to
set up your receiver by yourself, please contact a qualified technician.
The symbols serve as follows.
Warning
Indicates warning information.
Tips
Indicates any other additional important or helpful information.
MEnU
Represents a button on the remote control or the receiver.
(bold characters)
Move to
Represents a menu item within a window.
(Italic characters)
1.4 Accessories
Quick Installation Guide
1 remote control
2x batteries (AAA type)
WARnInG
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.
1.5 Usage of external USb devices
It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the receiver
might not work properly.
To ensure best performance of your USB storage device please format it via your receiver
(through the menu “
Media Player / HDD Information
”) to FAT32 system. Other file systems are
not supported by the receiver. However, it is possible to use already NTFS formatted disks.
STRONG cannot guarantee compatibility with all types of USB storage devices.
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max. 5 V/800 mA). If so,
please connect your USB HDD to an according external power adapter.
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
STRONG will not take responsibility for any loss of information or circumstances caused by loss
of information.
4
