Strong SRT 8203, User Manual

16

 English

7.1.3 Other parameters for channel installation

Define other parameters for channel installation.

Channel Filter

: 

 Define which channels will be stored into the channel list. With the selection of 

FTA 

Only

, only open non-scrambled channels will be added into the channel list. If 

All 

Channels

 is selected, all kind of found channels (scrambled and non-scrambled) will be 

stored into the channel list

Country

 Select the country of your residence

LCN

: 

 To select if the channel numbering will be according to LCN (as defined by operator) or 

not

Active Antenna

:   Before connecting your antenna to the receiver, please read the user manual of your 

antenna regarding antenna powering. This parameter is recommended to set to 

On

 only for active internal or external antennas which require power supply via an 

antenna cable with voltage of 5 V DC and consume less than 50 mA. In all other cases 
please leave this parameter as 

Off

.

7.2 Channel

Press 

MENU

 and select the 

Channel

 chapter.

This chapter provides options to organize your channels according to your preferences.
It consists of the following sub-menus: 

Channel Manager

 and 

Favorite List

7.2.1 Channels Manager

This sub-menu allows to lock, delete, skip, rename or to move of stored in receiver channels.

NOTE:

 To edit your channel preferences, it is required to enter the PIN-code to 
access the edit functions (default PIN-code 

0000

).

Lock

You can block certain channels from being viewed by other people, i.e. children. To lock a channel:
- use 

p

/

q

 to select a channel;

- press 

RED

. The selected channel will be marked as locked with a confirmation symbol in the lock 

column;
- proceed as described for any other channels you wish to lock.

NOTE:

 Watching a blocked channel will be possible only after entering your PIN 
code. Please check if the parameter 

System Lock

 in the 

Child Lock

 submenu 

is set to “ON”. See chapter 

7.4.2

.

NOTE:

 To unlock a channel, please proceed the same way.

Delete

To delete a channel from the channel list of your receiver:

„

„

use 

p

/

q

 to select a channel;

„

„

press 

GREEN

. The selected channel will be marked for deletion with a confirmation symbol in 

the delete column.

A confirmation banner will be displayed. Select 

Yes

 to delete the marked channels or 

No

 to cancel 

deletion.