background image

18

 English

NOTE:

 

 To remove channel from the favourite list please proceed the same way.

Press 

TV/R

 to switch between TV and radio channels.

Press 

EXIT

 to confirm and exit from the favourite channel lists sub-menu.

7.3 Preference

Press 

MENU

 and select the 

Preference

 chapter.

This sub-menu allows you to set the preferred parameters for OSD, language, for subtitles and audio.

OSD Language

:   Select menu and OSD language

OSD Timeout

 Define the duration of information banner display in viewing mode. It can be set in 

range from 1 to 6 seconds

OSD Transparency

 Define the transparency of menus and other system information windows. It can be 

set in range from 0% to 60%

1st Preferred Subtitle

 This setting allows you to define the default subtitle language. Digital TV allows the 

operator to transfer subtitles in one or more languages. Select your preferred subtitle 

language and the receiver will display the subtitles in that language automatically (if 
available). If you do not want to display subtitles, then adjust the setting to 

Undefined

In viewing mode, you can change this selection to a more suitable selection for the 
viewed channel, as described in chapter 

6.7.

2nd Preferred Subtitle

 Select the preferred 2nd subtitle language if the 1st preference is not available

Hard Hearing

 To enable Hard of Hearing mode set 

On

. To disable it set to 

Off

1st Preferred Audio

 This setting allows you to define the default audio track or language. Digital TV allows 

the operator to transmit more than one audio track or language. If a channel has 

multiple audio tracks or languages, the receiver will select the suitable audio track 

automatically according to your selection. In viewing mode, you can change this 
selection to a more suitable for the viewed channel, as described in chapter 

6.6.

2nd Preferred Language

 The receiver will use this language if 1st is not available.

NOTE:

 

 Subtitles will be displayed when available. Availability of DVB/HoH subtitles 
depends on the local broadcast.

NOTE:

 

 Please also consider that an event may contain "built-in" subtitles which 
cannot be disabled.

7.4 Settings

Press 

MENU

 and select the 

Setting

 chapter.

This sub-menu allows you to manage the system settings of your receiver.

7.4.1 Timers

This menu allows you to set up to 27 timed events for switching on the channel, recording or waking up 

the receiver from standby mode in a defined time.
The 

Timer List

 will be shown on the screen

Summary of Contents for SRT 8203






































Reviews: