Strong SRT 8526, User Manual

PART 2 • English

8

5.0 QUICk gUIDE To UsIng YoUR RECEIvER

We at STRONG understand that you can’t wait to enjoy your new high definition digital terrestrial 
receiver. The following quick guide will help you getting familiar with the basic operation of this 
device. We do, however, advice you to read the full manual to get the best performance from your 
receiver.
To switch your receiver ON or in standby, use the 

q

 button on the remote control or on the front 

panel of your receiver.
If you will not use the receiver for a longer time, unplug it from the mains by unplugging the power 
plug from the outlet.

noTE:

5 min after switching the receiver to standby it will enter the deep sleep 
mode. Within this time the receiver is able to start up quickly. Starting up 
from deep sleep takes approx. 40 sec.

5.1 Changing channels

There are different ways to change channels:

„

„

Via direct access using the 

0~9

 buttons.

„

„

Via the channel list through the 

ok

 button.

„

„

Via the 

pq

 or 

P+

 and 

P-

 buttons.

5.1.1 Direct access

To access to a channel directly, simply enter its number with the 

0~9

 buttons on the remote control. 

Channel numbers can be up to four digits long. Entering a number with less than four digits is 
possible. Just wait a few seconds and your receiver will switch to the channel number, or just press 

ok

 after inserting.

5.1.2 Channel list

Press 

ok

 in viewing mode to display the channel list. Use 

pq

 in the list to highlight your channel of 

choice and press 

ok

 to switch to this channel. To scroll to the next or previous 9 channels you can also 

use the 

P+/P-

 buttons. With the 

tu

 buttons you can toggle between the TV and radio channel list.

To change directly from TV to radio mode, press the 

Tv/R

 button.

By pressing the 

fAv

 button in viewing mode you can open the FAV group selection, if a favourite 

list has been created. If more than one FAV list have been created then you can use the 

tu

 buttons 

to toggle between the different FAV groups: Movies, News, Sports and Music.

5.1.3 Using 

pq

 or P+/P-

p

 switches to the next channel.

q

 switches to the previous channel.

P+

 switches to the next channel.

P-

 switches to the previous channel.

5.2 Adjusting volume and audio

To adjust the volume you can use the 

v+/v-

 or 

tu

 buttons. To mute the audio output, press 

!

, to 

enable the audio output again, press 

!

 again.

Some channels support a choice of different audio formats and/or languages. To select another 
audio language, press 

AUDIo

 in viewing mode. A list with available audio languages will be 

displayed. Use 

pq

 to select language and confirm with 

ok

. The audio channel as stereo, mono left 

and mono right can be selected with the 

tu

 buttons.

5.3 Info banner

Every time you switch to a channel, the info banner will be displayed. While watching TV you can 
press the 

i

 button to display it again to access information about the current channel and event. 

Press 

i

 twice for detailed programme and technical information.