n
RCL key: to back to previous program.
n
TEXT key: to access teletext (if available).
n
EPG key: to access the EPG (more information on
chapter 7.7
).
n
MUTE key: to disable the audio.
n
TV/R key: to switch between video and radio channels.
6.0 OPERATION
In viewing mode, several features are available to make watching TV a true pleasure. This paragraph
describes these features. Please also read chapter
8
to get familiar with the menu of your new tivùsat
receiver.
6.1 Selecting channels
There are different ways to change channels with your receiver.
n
Via direct access
n
Via the channel list
n
Via the
CH+/-
buttons
6.1.1 Direct access
To gain direct access to a certain channel simply enter its number with the
0~9
keys on the remote
control. Channel numbers can be up to 4 digits long. Entering numbers and values with less than 4 digits
is possible. Just wait a few seconds and your receiver will switch to the selected channel.
6.1.2 Channel list
Press
OK
button in viewing mode to display the channel list.
Use
pq
to highlight your channel of choice and press
OK
to select the highlighted channel for preview.
Use the
FAV
button to get access to a group of favourite lists. Press
OK
to select only channels from a
particular list. Refer to chapter
8.2.2 TV Channel Manager
to organize channels into favourite lists.
The channel list is also equipped with three additional functions accessible by pressing the colored
function keys. Their functions are described below:
FAV List
:
Green button – To select one of the 8 Favourite lists (to set these favourite
channels see chapter X).
Edit
:
Yellow button – To lock the displayed channel or to add it to one of the
favourite lists.
Satellite
:
Blue button – To select a source other than Hotbird (only if more than one
satellite has been scanned).
NOTE:
In green, on the top row of the channel list, is provided the technical
information of the selected channel (frequency, symbol rate, polarization
and satellite).
6.2 Volume Control
The volume control allows you to adjust the audio volume. Press
VOL+/-
or
t
u
button to adjust the
audio volume. Press the
!
button to temporarily mute audio. To restore the sound press the
!
button
again or select
VOL+/-
NOTE:
The
!
function remains set while you switch channels.
9
