background image

Page 5 of 15 

 

Cluttered, wet, or dark work areas can result in injury. Using the product in confined work areas 
may put you dangerously close to other cutting tools and rotating parts. 

 

Keep children and bystanders away from the work area while operating the logging dolly. Do not 
allow children to handle the product. 

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the logging dolly. 
Do not use the logging dolly while you are tired or under the influence of drugs, alcohol, or 
medication. A moment of inattention while operating the log dolly may result in serious personal 
injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 
parts. 

 

Do not overreach. Keep proper footing and balance at all times. 

 

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety 
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in 
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems, 
and hearing protection when appropriate. This applies to all persons in the work area.  

 

Do not overreach. Keep proper footing and balance at all times. 

 

CAUTION

 

LOG ARCH & HOLDER USE AND CARE 

 

Do not force the logging dolly. Products are safer and do a better job when used in the manner for 
which they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the logging dolly will operate 
properly and perform its intended function. Replace damaged or worn parts immediately. Never 
operate the logging dolly with a damaged part. 

 

Store the logging dolly when it is not in use. Store it in a dry, secure place out of the reach of 
children. Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your product. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool.  

 

Specific Operation Warnings 

WARNING

 

 

To prevent serious injury read and understand owner’s manual before use. 

Summary of Contents for 51962
















Reviews: