Page 8 of 15
Assembly Instructions
⚠
WARNING
Do not allow persons to operate or assemble this log skidding arch until they have read this
manual and have developed a thorough understanding of how the product works.
Take all parts out of the shipping package and inspect components to ensure there are no
missing pieces before starting to assemble.
1. Place a wheel spacer onto one shaft end of the vertical frame (#1) and then install the pneumatic
rubber tire (#2) by sliding the wheel into place and fastening it with a wheel R pin. Place another
wheel spacer onto the other side shaft end to install another pneumatic rubber tire (#2) the same
way. Fasten with another wheel R pin.
2. Attach the frame dragging bar (#3) to the vertical frame (#1) with 4 sets of M12 x70 bolts, dia 12
washers, and M12 nuts. Do not completely tighten the nuts yet.
Summary of Contents for 51962
Page 12: ...Page 12 of 15 Parts Diagram ...
