background image

Page 4 of 13 

 

Intended Use 

The Gantry Crane is ideal for shops where heavy level lifting is essential. 

Technical Specifications 

Capacity: 

2 Ton 

Adjustable Height: 

7

’ 11” - 11’ 9”

 

Casters: 

5

” 

Important Safety Information 

WARNING

 

 

Read and understand all instructions. Failure to follow all instructions may result in serious injury 
or property damage. 

 

The warnings, cautions, and instructions in this manual cannot cover all possible conditions or 
situations that could occur. Exercise common sense and caution when using this crane. Always be 
aware of the environment and ensure that the tool is used in a safe and responsible manner. 

 

Do not allow persons to operate or assemble the crane until they have read this manual and have 
developed a thorough understanding of how it works. 

 

Do not modify this product in any way. Unauthorized modification may impair the function and/or 
safety and could affect the life of the crane. There are specific applications for which the product 
was designed.  

 

Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger 
industrial equipment. There are certain applications for which this equipment was designed. It will 
be safer and do a better job at the capacity for which it was intended. DO NOT use this crane for a 
purpose for which it was not intended. 

 

Industrial or commercial applications must follow OSHA requirements. 

 

WARNING

 

 

This product may contain chemicals known to the State of California to cause cancer, birth defects 
or other reproductive harm. 

 

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities 
contains chemicals known to the State of California to cause cancer, birth defects, or other 
reproductive harm. Some examples of these chemicals are: 

 

- lead from lead-based paints, 

 

- crystalline silica from bricks and cement and other masonry products, and 

 

- arsenic and chromium from chemically-treated lumber. 

 

Your risk from these exposures varies, depending on how often you do this type of work. To 
reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved 
safety equipment, such as dust masks that are specially designed to filter out microscopic 
particles. 

 

Summary of Contents for 52523














Reviews: