Page 5 of 12
Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.
Wear the proper personal protective equipment when necessary. Use ANSIZ87.1 compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,
and hearing protection when appropriate. This applies to all persons in the work area.
Do not overreach. Keep proper footing and balance at all times.
Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.
⚠
CAUTION
RIVET SPINNER AND CHAIN BREAKER USE AND CARE
Do not force the rivet spinner and chain breaker. Products are safer and do a better job when
used in the manner for which they are designed. Plan your work, and use the correct product for
the job.
Do not modify the rivet spinner and chain breaker in any way. Unauthorized modification may
impair the function and/or safety and could affect the life of the equipment.
Check for damaged parts before each use. Carefully check that the rivet spinner and chain
breaker will operate properly and perform its intended function. Replace damaged or worn parts
immediately. Never operate the product with a damaged part.
Store the rivet spinner and chain breaker when it is not in use. Store it in a dry, secure place out of
the reach of children. Inspect the tool for good working condition prior to storage and before re-
use.
Use only accessories that are recommended by the manufacturer for use with your rivet spinner
and chain breaker. Accessories that may be suitable for one product may create a risk of injury
when used with another tool. Never use an accessory that has a lower operating speed or
operating pressure than the tool itself.
Keep guards in place and in working order. Never operate the rivet spinner and chain breaker
without the guards in place.
Specific Operation Warnings
⚠
WARNING
To prevent serious injury or death, read and understand owner’s manual before use.
Wear ANSI Z87.1 compliant safety goggles.
Keep hands clear of chain breaker during use.
Keeps hands clear of anvil during use.
Inspect for damaged parts before use.
Not for use by or around children.
