Page 7 of 23
•
Use only on a hard, level surface.
•
Do not transport loads while the platform is in the raised position.
•
Do not tilt machine back with a raised load.
•
Avoid debris and uneven surfaces while moving a machine.
•
Do not use the machine on a moving or mobile surface, or vehicle.
•
Do not cause a horizontal force or side load to the machine by raising or lowering a fixed or
overhanging load.
•
Do not cause a horizontal force or side load to the machine.
BODILY INJURY HAZARD
•
Do not grasp the cable.
•
Keep hands and fingers away from pulleys, the carriage and other potential pinch points.
•
Do not place arms, hands, or fingers through the frame.
•
Keep hands and feet clear of the platform when lowering the load.
ELECTRIC SHOCK HAZARD
•
This machine is not electrically insulated and will not provide protection from contact.
•
Maintain safe distances away from electrical power lines and apparatus in accordance with
applicable governmental regulations and table A.
•
Allow for mast movement and electrical line sway or sag, and be aware of strong or gusty winds.
•
Keep away from the machine if it contacts energized power lines. Personnel must not touch or
operate machine until power lines are shut off.
•
Do not use the machine as a ground for welding.
FAILURE TO HEED THESE WARNINGS MAY RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
Summary of Contents for 61134
Page 19: ...Page 19 of 23 Parts Diagram ...
