BM10
STEP 11.
Following Photo below, slip
#1654 Latch Plate
around
#1665 Handle... se-
cure with two (2) #I Bolts and #NN Nuts... finger
tight.
Slip 5/8” hole in
end
of #1666 Lift Linkage
over
Lower Stud
[#AC Bolt with
one mounted
#2207 Bushing and KK Nut].
Slip #1670 Pin through the two 1” holes
on
outside faces
of #1694 Front Hitch,
center
the
Pin.
1670 Pin
2203 Spring
1694 Front Hitch
5/8” hole
1666 Lift Linkage
For BM13 Bucket Mouth use:
Slip
(2)
#2203 Springs over
each end
of #1670 Pin.
For
DB44 Dozer Blade use:
Slip
(1)
#2203 Spring
over
each end
of #1670 Pin. Secure
each end
with #AG Bolt, #RR Washer, second #RR
Washer and secure with #OO Nut.... tighten...
see Photo below.
STEP 12.
From under Right Fender, in-
sert remaining #1906 Cotter Pin through 3/16”
hole and “clinch” on
outside face
of #1605 Right
Fender.
1665
1906
1654
1605
Right Fender
I Bolts &
NN Nuts
AG Bolt
OO Nut
RR Washer
AO Bolt &
JJ Nuts
AO Bolt &
JJ Nuts
Upper Stud
AC Bolt with
2207 Bushing
& KK Nut
Note:
Use (2) #2203 Spings
for each side if using
a BM13 - Bucket
Mouth.
Note:
Use (1) #2203 Spring
for each side if using
just the DB44 - Dozer
Blade.
Lower Stud
AC Bolt with 2207 Bushing
& KK Nut
1667
