Struck Mini-Beep MBA80-B Assembly Manual Download

Page: 9 / 14

LIMITED WARRANTY

MINI-BEEP Amphibious ORT’s are exclusively “home-built” vehicles. The “builder” of a Mini-Beep, as-

sumes total responsibility for proper construction and assembly following this authorized MBA80 Mini-Beep
Body Plans/Assembly Manual.

Each purchaser of this authorized Mini-Beep Body Plans /Assembly Manual is licensed to produce one

version of the model MBA80 Mini-Beep. Each Mini-Beep Body Plans/Assembly Manual is assigned a Body/Hull
Identification number... enter your Body/Hull Identification number on page D2 for future reference. This num-
ber allows the builder to identify his Mini-Beep for potential insurance and registration requirements.

Though the Struck Corp. encourages creativity & customization on the part of Mini-Beep builders, the

Struck Corp. can not warrant the safety nor performance of any modifications that the Struck Corp. has not pro-
duced, tested and evaluated.

NOTE: Due to the limited size of our engineering staff, the Struck Corp. does not offer engineering as-

sistance to customers regarding their own unique Mini-Beep modifications using non-Struck components. All
KITS are sold as complete entities. They are not available on a piece by piece basis except for fulfilling war-
ranty responsibilities.

Struck Corp. makes every effort to assure that its products meet high quality and durability standards,

and warrants the original purchaser for a period of one year from date of purchase that all parts and compo-
nents of the product are free from defects in materials and workmanship. This warranty does not apply to dam-
age due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our
facilities, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to
persons or property, or for incidental, contingent, special or consequential damages arising from the use of our
products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND
FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchan-
dise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily provide a replacement. We will return repaired products
at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the
scope of our warranty, then purchaser must bear the cost of our returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state

to state. Engines are warranted by their manufacturer.

C.F. STRUCK CORP.

No portion of this Plans/Assembly Manual, drawings, step by step instructions, DVD’s, or photos may be
reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying,
recording or by any information storage and retrieval system, without prior written permission of the orig-
inal copyright owner.

2.1.12

NOTE: The MINI-BEEP used in all Catalogs, Manuals, DVD’s, etc. was a prototype, operated by trained pro-

fessional drivers and assistants. In Photos and DVD’s, PFD’s (personal floatation devices) were “stowed” in the
BEEP’s “trunk” and not worn in compliance with current Wisconsin DNR regulations for lakes and streams in the State
of Wisconsin. We strongly encourage MINI-BEEP owners to use proper PFD’s and to strictly follow all applicable
safety & licensing regulations in their own locality, if required.