Structural Concepts Addenda SHS9251 Installation & Operating Manual Download

Page: 16 / 17

Serial Label Location & Information Listed / Technical Information & Service



Serial labels are located near the electrical access on your case.



Serial labels contain electrical, temperature & refrigeration information, as well as regulatory

standards to which the case conforms.



For additional technical information and service, see the

TECHNICAL SERVICE

page in this

manual for instructions on contacting Structural Concepts’ Technical Service Department.



See images below for samples of both refrigerated and non-refrigerated serial labels.

SERIAL LABEL LOCATION & INFORMATION LISTED / TECH INFO & SERVICE

Serial Label Location & Information Listed / Technical Information & Service



Serial labels are located at rear or side of your case.



Serial labels contain general model and serial number to the case.



For additional technical information and service, see the

TECHNICAL SERVICE

page in this

manual for instructions on contacting Structural Concepts’ Technical Service Department.



See images below for sample ambient,non-electrified case labels.

--- Sample Serial Labels For Non-Refrigerated, Non-Electrified Cases ---

Summary of Contents for Addenda SHS9251


















Search results

Summary of Contents for Addenda SHS9251

Reviews:

Related manuals for Addenda SHS9251

Brands by name

Popular brands

Structural Concepts Addenda SHS9251, Installation & Operating Manual

Search results

Summary of Contents for Addenda SHS9251

Reviews:

Related manuals for Addenda SHS9251

Brands by name

Popular brands