13
1. Shelf Assembly Removal
Remove glass shelves
For lighted shelving, unplug the light cord.
Lift light shelf straight up to separate from
brackets.
Remove rear shelf support
Remove brackets. Note it may be necessary to
remove the nylon shipping bracket retainer.
Pliers will be required to accomplish this task.
2. Standard Light Fixtures
Removal of lamp:
Rotate lamp (1/4-turn) either direction to
disengage (upper or lower) pins/contacts from
lamp mounting sockets.
Remove bulb by applying even pressure from
the back side at the bulb ends and pulling the
remaining contact from the sockets.
Installation of lamp:
Align pins with slot.
Insert pins into socket by rotating the bulb 1/4
turn to secure either the (upper or lower)
pinned contacts into the sockets.
Rotate the remaining bulb contacts (1/4 turn)
into the remaining lamp-mounting socket
contacts.
See illustration below.
See next page for LED Light Fixture Maintenance
Fundamentals.
MAINTENANCE FUNDAMENTALS: SHELF ASSEMBLY REMOVAL / STANDARD LIGHT FIXTURES
Lamp Pins
Light Socket
Light Fixture
Illustrations above and at right show Light
Fixture. To remove lamp, simply rotate lamp
clockwise and out. To replace, place one set of
pins into slots and rotate second set of pins into
slots.
Shelf Bracket
Rear Shelf Support
Glass
Shelving
Light
Fixture
Shelf Bracket
(3) Bracket
Retainers
(denoted
by
at right)
(4) Light
Fixtures
(denoted
by
at right)
