15
CONDENSATE PAN ACCESS / REFRIG. PKG. LAYOUT FOR CDR4287, A & B427WND - PAGE 1 OF 3
Condensate Pan
Condensate
Pan Support
Condensate Pan
Screws (Connecting
Pan Foot To
Support)
1. Condensate Pan Access (Models CDR4287,
CDR4287A and B427WND)
Warning! Disconnect power before providing
maintenance and service to unit.
Depending upon design, remove front grille by
either removing (4) screws or simply lifting up and
off front of case (without screw removal).
Remove (2) shipment retaining screws.
Carefully slide out refrigeration package.
Unplug the condensate pan from its outlet.
Condenser Coils
Compressor
Dryer Filter
Condenser Fan
Sight Glass
Electrical
Components
Note: Condenser Package
Shown Rotated For
Illustrative Purposes Only
Remove the (4) screws holding condensate pan
feet to condensate pan support.
Carefully slide the condensate pan off from the
condensate pan support.
When done servicing or cleaning, reconnect
condensate pan in reverse order it was removed.
Replace front grille.
See illustration below for general layout of
refrigeration packages for models CDR4287,
CDR4287A and B427WND.
Shipment Retaining
Screws (Typ.)