5
INSTALLATION
Various Types Of
Case Shipping
Brackets
1. Removing Case Shipping Brackets That Are Attached To Skid
Remove screws holding Case Shipping Brackets to skid.
Remove Case Shipping Brackets from Skid.
See illustrations below. Note: Shipping Brackets will vary in size, shape, material and location
depending upon case type and model.
Carefully Slide Skid
Out From Under Unit
2. Remove Unit From Skid
Remove case from skid
and place into proper
position.
To prevent damage,
support case while sliding
skid out from under case.
Note:Illustration at right
reflects general outline of
sample case and does
not reflect any particular
model or options).
3. Positioning Case
Before adjusting levelers,
check that case is in prop-
er position.
Support
case while
removing
from skid.
Pry Bar
Base
Frame
Leveler
Adjustable
Wrench
Toe-Kick
4. Adjust Levelers
After case is in proper position, adjust case so
it is level and plumb (see illustration at right).
You may need to remove front and/or rear
Toe-Kick to access levelers.
Use adjustable wrench to adjust leveler.
See illustration and photos below.