4
PRECAUTIONS
Following are important precautions to prevent
damage to unit or merchandise.
Please read carefully!
See previous page for specifics on
OVERVIEW, NSF
TYPE, COMPLIANCE
and
WARNINGS
.
CAUTION
CAUTION
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
the use of a GFCI breaker is strongly recommended.
CAUTION
Fluorescent lamps have been treated to resist breakage
and must be replaced with similarly treated lamps.
CAUTION! ADVERSE CONDITIONS / SPACING ISSUES
Performance issues caused by adverse conditions are NOT covered
by warranty.
End panels must be tightly joined or kept at least 6-inches away from
any structure to prevent condensation.
Unit must be kept at least 15-feet from exterior doors, overhead HVAC
vents or any air curtain disruption to maintain proper temperatures.
Unit must not be exposed to direct sunlight or any heat source (ovens,
fryers, etc.).
Tile floors, low ceilings or small rooms will increase noise level.
Whisper Cool compressor blanket or remote unit may resolve noise
level issues.
Keep at least 8-inch clearance above unit for air discharge
(self-contained units only).
CAUTION
WIRING DIAGRAM
Each case has its own wiring diagram folded and in its
own packet.
Wiring diagram placement may vary; it may be placed
near ballast box, field wiring box, raceway cover, or
other related location.
CAUTION! CHECK EVAPORATOR PAN POSITION AND PLUG
Water on flooring can cause extensive damage!
Before powering up unit, check the following:
Evaporator pan MUST BE positioned directly under condensate drain.
Evaporator pan plug MUST BE securely plugged into receptacle.
OVERVIEW / NSF® TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING - PAGE 2 of 2
CAUTION
LED lamps reflect specific size, shape and overall design.
Any replacements must meet factory specifications.
CAUTION
