7
POSITIONING & ALIGNING / ADJUSTING LEVELERS / LOCKING CASTERS IN PLACE
To unlock casters (from the locked position),
press down on the RAISED caster lever (as
shown in illustration below).
Casters are now in unlocked position.
Pry Bar
Leveler
Base
Frame
Adjustable
Wrench
Illustration Shown Reflects Remote Unit Only.
It May Not Exactly Reflect Every Feature or
Option of Your Particular Case.
Casters
Locked
Casters
Unlocked
1. Position & Align Case Alongside Others
Before adjusting levelers, make certain that the
case is in proper position and, if required, aligned
with adjoining case.
This may require the repositioning of case you
are installing or the already positioned case.
2. Adjust Levelers
After case is in position, adjust case so it is level
and plumb.
Use adjustable wrench (and/or a pry bar) to
adjust leveler.
Do not use pry bar on end panel. It may chip.
Use pry bar ONLY on base frame to avoid
damaging case.
3. Caster Locking / Unlocking Operation
To lock casters (from the unlocked position),
press down on each RAISED caster lever (as
shown top-right). Casters are now locked.
