18
CASE DESIGN, CONT’D: LED LIGHT SWITCH LOCATIONS / LED LIGHTS / THERMOMETERS
7. LED Light Switch Locations
•
Separate LED light switches are in upper and lower
sections of case (as shown below).
•
Cases with lower rear sliding doors have different
light switch location than units with solid back rear
lower panel (as shown in illustrations below).
6. LED Lights
•
LED lights are located at both header and
shelving of case (as shown below).
•
Check that ALL of the light plugs are properly
connected to the LED light.
•
Plug must be inserted ALL THE WAY into the
LED light orifice (with no gap) to work properly.
•
See
TROUBLESHOOTING
section in manual
if LED lights malfunction.
8. Thermometer Function & Placement
•
Separate thermometers are located in both
upper and lower sections of case.
•
Cases with lower rear sliding doors have
different thermometer location than units with
solid back rear lower plenums (as shown in
illustrations below).
•
Thermometer provides temperature of
refrigerated section of case.
•
Thermometers reflect warmest air
temperature in merchandiser. They do not
provide actual food temperature.
•
Use probe thermometers to determine
actual product temperatures.
Upper Section
LED Light
Switch And
Thermometer
Lower Section
LED Light
Switch And
Thermometer
Thermometer
--- Case With Solid Back Rear Lower Plenum ---
--- Case With Lower Rear Sliding Doors ---
Light
Switch
LED Light
Plug
