20
40
60
80
100
120
20
40
60
80
100
120
140
160
180 200
Manual mode for Fast and
Uncomplicated Cutting
When operating the cut-off machine
manually, the cutting table with the
clamped workpiece is easily posi-
tioned under the cut-off wheel, and
you pull the cutting handle to begin
cutting.
Very High Cutting Capacity
You can cut workpieces with a dia-
meter of up to 80 mm (3.1") on the
Discotom-6. In automatic mode
though, the cutting table is movable
up to 200 mm (7.9") enabling cutting
of very long samples. You can for in-
stance cut a length of 140 mm (5.5")
at a workpiece thickness of 65 mm
(2.6").
Quick positioning and
Auto Stop
The cutting table can be moved with
increased speed allowing quick posi-
tioning and set-up.
Additionally, a freely selectable stop
position can be set where the cutting
process will be stopped and the cut-
ting table returns to its start position.
Depth mm
Height mm
The graph shows the cutting capacity in automatic
cutting mode with a new cut-off wheel and flexible
clamping tools. The real cutting capacity depends on
the sample material
Automatic Feed Speed Reduction
When cutting automatically, you
choose a feed speed from 0.1 to 2.5
mm/sec. If the feed speed is set too
high and the machine cannot cut
through the workpiece, Discotom-6
will automatically reduce the feed
speed and continue cutting.
This may repeat itself up to 5 times
and prevents damage or burns on the
sample surface.
Effective Cooling of the
Cutting Area
A very important design detail is that
the water cooling tubes are integrat-
ed into the cut-off wheel guard. The
cooling water is applied to the cut-off
wheel under high pressure and at a
right angle. The cooling water there-
by “breaks” the thin layer of air sur-
rounding the spinning cut-off wheel,
and the result is excellent cooling of
the cutting area. Discotom-6 is avail-
able with a large 65 l recirculating
cooling unit, ensuring that the cool-
ing water does not overheat.
High Cutting Capacity
Cutting Capacity
Maximum cutting diameter 80 mm (3.1")
Summary of Contents for Discotom-6
