Monitoring the Load on the
Cutting Motor
The front panel includes a three-col-
oured LED-bar, indicating the load on
the cutting motor.
In automatic cutting mode the LED-
bar will show the load on the cutting
motor and if the red area is reached
the feed speed will be reduced. When
cutting manually the LED-bar gives a
good indication of how much force to
put on the workpiece.
Corrosion resistant Cutting Chamber
The cutting chamber, made of cor-
rosion resistant materials, is provid-
ed with a 225 mm x 386 mm (8.6" x
15.2") cutting table, which is easily
moved up to 200 mm (7.9") by con-
trol keys. The cutting table is made
of corrosion resistant cast alumin-
ium and is fitted with a top surface
The adjustable cutting table enables
parallel sectioning
of stainless steel bands. These steel
bands are easily exchanged if dam-
aged or worn.
A flush hose makes daily cleaning
quick and efficient, and a powerful
lamp lights up the cutting chamber
allowing you to monitor the cutting
process through the large window in
the protection guard. An exhaust sys-
tem may be connected.
Quick and Handy Clamping
of the Workpiece
The integrated cutting table has six
10 mm T-slots, facilitating the use
of universal clamping tools.
Adding an Adjustable Cutting
Table for Parallel Sectioning
An adjustable cutting table is availa-
ble for mounting on the
Discotom-6. It positions the work-
piece at a right angle to the cut-off
wheel, allowing parallel sections to
be cut. The table can move up to 60
mm (2.4").
The flush hose facilitates cleaning
The hour counter
registers the
hours the cutting
motor has been in
operation
Quick-clamping devices enable easy and fast securing
of workpieces
For irregulary shaped workpieces the vertical clamping
tools are employed
High Safety Level
Discotom-6 cannot be started while
the protection guard is open. Dur-
ing cutting the protection guard is
locked, eliminating any risk of injury.
A built-in electric, dynamic motor
brake stops the cutting motor with-
in a few seconds, ensuring quick ac-
cess to the cutting chamber after cut-
ting.
Summary of Contents for Discotom-6
