Discotom-6
Instruction Manual
12
When the machine is used in AUTO mode the cut-off wheel is
stationary and the cutting table moves. In MANUAL mode the cutting
table is stationary and the operator moves the cut-off wheel.
Clamp the workpiece.
Loosen the black handle situated on the right hand side of the
cutting chamber.
Lower the cut-off wheel by drawing the cutting handle
downwards until the cut-off wheel is positioned ready to cut the
workpiece. Fasten the black handle again.
Press
FORWARDS to position the cutting table and the
workpiece just in front of the cut-off wheel.
Close the protection guard.
Set the desired feed speed
Press the AUTO mode key to select AUTO mode.
Press START
to start the machine. The cut-off wheel starts
rotating and the cooling water is turned on. The cutting table
moves forward toward the cut-off wheel at the pre-set feed
speed.
If the machine has been stopped with the STOP
key, the
cutting table will stay in position. To return the cutting table to its
start position press BACKWARDS
once. Struers recommends
manually lifting the cut-off wheel away before the cutting table is
moved back. Please note that the protection guard has to be
closed in order to carry out this operation. If the protection guard
has been opened press and hold the BACKWARDS key
to
move the cutting table to its start position.
If the cutting table reaches the back of the cutting chamber
during the cutting process, the cut-off wheel automatically stops
and the cutting table returns to its start position.
Starting/Stopping
the Cutting Process
Automatic Cutting
(AUTO mode)
Summary of Contents for Discotom-6
