TegraPol-11/ -15
TegraForce-1
Instruction Manual
23
4.
Operating TegraPol with TegraForce-1
The TegraForce-1 can be operated with either a specimen mover
plate or a specimen holder.
Unlock the TegraForce-1 using the handle and let it swing into
the upright position.
Remove the three screws securing the specimen mover plate or
slide the specimen holder off the legs.
Put a specimen mover plate in position and secure it with the
three screws.
Insert the correct preparation disc and press TegraForce-1 down
until the lock engages.
Unlock the TegraForce-1 using the handle and let it swing into
the upright position.
Remove the three screws securing the specimen mover plate.
Slide the specimen holder evenly onto the three legs.
Insert the correct preparation disc and press TegraForce-1 down
until the lock engages.
When a TegraPol, which has been fitted with a TegraForce-1, is
switched on, the software inside the TegraPol is able to detect the
TegraForce-1, automatically, and informs you of its presence in the
start-up display.
Inserting Specimen Mover
Plates / Holders
Inserting a Specimen Mover
Plate
Inserting a Specimen Holder
WARNING!
When working with specimen holders make sure that the screws clamping
the specimens do not stick out of the specimen holder.
Use different length of screws for samples with different diameters.
Switching on the TegraPol with
a TegraForce-1 Installed
