TegraPol-11/ -15
TegraForce-1
Instruction Manual
32
TegraDoser is mounted on the side of the TegraForce. The interface
between the TegraForce and TegraDoser is achieved through the D-
Sub connector located in the recess on the side of the TegraDoser.
With the bottle containing the required suspension or lubricant:
Swing the dosing nozzle on TegraDoser aside to gain access to
the connector.
Insert TegraDoser into the recess on the side of TegraForce.
Press downwards until TegraDoser clicks into position.
Swing the dosing nozzle back in to position under the body of
TegraDoser.
Swing the dosing nozzle outwards away from TegraForce until it
is clear of the connector.
Grip the sides of the bottle and pull upwards until the
TegraDoser comes clear of TegraForce.
TegraDoser-1 Mounting
Fitting TegraDoser-1
Removing TegraDoser-1
Connector
