background image

Warranty

39

Stryker Endoscopy warrants the Model 1088 Medical Video Camera 
against defects in both materials and workmanship to the registered 
owner at the time of purchase.  All components including the charge 
coupled device (CCD) located in the camera head are covered by the 
warranty for a period of one year from the date of purchase.
This warranty does not apply to any unit which has been subject to 
misuse, neglect, improper installation or that which has been altered, 
adjusted, or tampered with by any person other than Stryker Endoscopy 
authorized personnel.
If upon examination by authorized service personnel, it is determined that 
the malfunction is due to misuse, or abuse, warranty provisions will not 
apply.  An estimate of the cost of repair work will be given to the customer 
prior to servicing and repairing the unit.
The customer is responsible for returning the defective equipment to the 
factory at his or her own expense.  Stryker Endoscopy or its 
representative will service the unit, repair or replace any defective parts 
thereof, and return the unit.
If, upon examination, it is determined that the fault has been caused by 
misuse or abnormal conditions of operation, the repairs will be billed to 
the customer as out-of-warranty repairs.
Instruments repaired under Stryker Endoscopy’s standard repair program 
will be issued a thirty day warranty against defects in both materials and 
workmanship, provided the original warranty period has passed.  
Instruments submitted due to defects in materials and workmanship 
during the warranty period will be repaired at no charge to the customer.
The warranty as set forth herein is exclusive and in lieu of all other 
warranties, remedies,  obligations and liabilities of Stryker Endoscopy 
Inc., expressed or implied, including the implied warranties of 
merchantability and fitness for use and of consequential damages.  These 
products are being sold only for the purpose described herein, and such 
warranty only runs to the purchaser.  In no event shall Stryker Endoscopy 
be liable for any breach of warranty in any amount exceeding the 
purchase price of the product.
No agent, employee or representative of Stryker Endoscopy has the 
authority to bind the Company to any other warranty, affirmation, or 
representation concerning this instrument.
This warranty is valid only to the original purchaser of Stryker Endoscopy 
products directly from Stryker Endoscopy or from a Stryker Endoscopy 
authorized agent.  The warranty cannot be transferred or assigned by the 
original purchaser.

Warranty

Summary of Contents for 1088















































Reviews: