10
www.stryker.com
EN
0940-001-025 Rev-L
Specifications
Model:
Stryker Cast Cutter (REF 0940-000-000)
Stryker Cast Cutter (REF 0941-000-000)
Electrical:
100-120 V
, 50-60 Hz, 1.5 A input
220-240 V
, 50-60 Hz, 0.75 A input
Speed:
100 V
Nominal
120 V
Nominal
230 V
, 50 Hz Nominal
High:
12,800 CPM (cycles per minute)
15,900 CPM
15,900 CPM
Standard:
7,700 CPM
10,700 CPM
10,700 CPM
Power Cord:
3.1 m [10.25 ft] length, fitted with NEMA 1-15P plug
3.1 m [10.25 ft] length
Power Source Cord:
None
2.5 m [8.2 ft] length, fitted with CEE 7/7 Schucko plug
Dimensions:
25.4 cm [10 inch] length
25.4 cm [10 inch] length
7.6 cm [3 inch] height
7.6 cm [3 inch] height
Mass:
1.3 kg [2.8 lb]
1.3 kg [2.8 lb]
Excursion:
3.2 mm [0.125 inch]
3.2 mm [0.125 inch]
Mode of Operation:
Continuous with Intermittent Loading
Continuous with Intermittent Loading
Duty Cycle:
15 minutes on, 1 time
15 minutes on, 1 time
Rest Between Cycles:
20 minutes
20 minutes
Maximum Temperature of
Applied Part:
Less than 48 °C [118 °F] (Maximum surface temperature as tested
to the standards listed under
Product Safety Certification
.)
Less than 48 °C [118 °F] (Maximum surface temperature as tested
to the standards listed under
Product Safety Certification
.)
Equipment Type:
Class II (Double Insulation)
Class II (Double Insulation)
Type BF Applied Part
Type BF Applied Part
Ingress Protection:
IPX0 Ordinary Equipment
IPX0 Ordinary Equipment
Means of Isolation from
Supply Mains:
Disconnection of the power cord plug from the facility power
outlet or CastVac power outlet
Disconnection of the power cord plug from the facility power
outlet or CastVac power outlet
Environmental Conditions:
Operation
Storage and Transportation
Operation
Storage and Transportation
Temperature Limitation:
Humidity Limitation:
Atmospheric Pressure
Limitation:
