El Capistan
- dTape Echo
pg 24
External Control
Configuring MultiSwitch Plus
Configure El Capistan and MultiSwitch Plus for remote access to three
additional presets�
1
Press and hold the
TAP
footswitch while connecting power to the
pedal� Hold until both LEDs stop blinking�
2
Turn the
TIME
knob all the way counter-clockwise to set the MIDI
channel to Channel
1
� The
TAP
LED should be
GREEN
�
3
Turn the
TAPE AGE
knob to select the preferred
MIDI OUTPUT
options:
•
Send MIDI CC, PC, and Other Data: WHITE
•
Send MIDI CC and Other Data:
GREEN
•
Send MIDI PC and Other Data:
PURPLE
•
Send Other Data:
AMBER
4
Turn the
MIX
knob all the way clockwise to set the
EXP/MIDI
jack to
MIDI mode� The
ON
LED should be
BLUE
�
5
Press either footswitch to exit and store the MIDI channel, the
MIDI
OUTPUT
setting, and the
EXP/MIDI
jack mode�
6
Connect a TRS cable to the
EXP/MIDI
jack on El Capistan�
7
Press and hold the
A
footswitch on MultiSwitch Plus while connecting
the TRS cable to any one of the three jacks to set it to Preset mode�
