- 15 -
•
INITIAL OPERATING INSTRUCTIONS
•
Consult instruction manual for commissioning instructions.
•
Do not run pump dry. Allow the water to be pumped to enter the pump body thus ensuring
the seal is lubricated before switching the pump on. Failure to do this will damage the
seal.
•
Carefully check pump and pipework for leaks whilst pump running and stationary before
leaving the installation unattended.
Stuart Turner Limited reserves the right to amend specifications without notice.
Receptacles at 45
o
(approximately)
19
Fig. 26
Fig. 27
Receptacles at 45
o
(approximately)
Receptacles at 45
o
(approximately)
Blue wires
Black wire
Red wire
