Studebaker SB2135, Owner'S Manual

E

‐

12

5. Press RECORD 



 BUTTON (#17). PLAY



BUTTON (#16) is depressed 

automatically.  

6.  To pause recording, press PAUSE   BUTTON (#12). Press the PAUSE   BUTTON 

(#12) again to resume recording.  

7.  To stop recording, press STOP/EJECT 

 BUTTON (#13). 

8.  To listen to your recording, set the FUNCTION SELECTOR (#9) to TAPE /OFF 

position. Press REW.



 BUTTON (#15) to rewind the tape to search your recording, 

then press PLAY



BUTTON (#16) to listen. 

Recording from the built-in microphone 

1.  Set the FUNCTION SELECTOR (#9) to TAPE/OFF position. 
2.   Press STOP/EJECT 

 BUTTON (#13) to open the CASSETTE HOLDER (#6). 

3.   Insert a tape and close the CASSETTE HOLDER (#6). 
4.   Press RECORD 



 BUTTON (#17). PLAY



BUTTON (#16) is depressed 

automatically.  

5.  To pause recording, press PAUSE   BUTTON (#12). Press the button again to 

resume recording.  

6.  To stop recording, press STOP/EJECT 

 BUTTON (#13). 

7.  To listen to your recording, press REW. button (#11) to rewind the tape to search 

your recording, then press PLAY



BUTTON (#16) to listen. 

 
Note: The Built-in MICROPHONE (#3) is located on the front of the unit. Place the 

recorder near the sound source to be recorded. 

CARE AND MAINTENANCE 

1.  Do not subject the unit to excessive force, shock, dust or extreme temperature. 
2.  Do not tamper the internal components of the unit. 
3.  Clean your unit with a dry cloth. Solvent or detergent should never be used. 
4.  Avoid leaving your unit in direct sunlight or in hot, humid or dusty places. 
5.  Keep your unit away from heating appliances and sources of electrical noise 

such as fluorescent lamps or motors. 

6.  If drop-outs or interruptions occur in the music during 

CD play, or if the CD fails to play at all, its bottom 
surface may require cleaning. Before playing, wipe the 
disc from the center outwards with a good soft cleaning 
cloth 

ABOUT CASSETTE TAPES 

Whenever you record on a cassette any previously recorded material is erased as the 
new material is recorded. To prevent you from accidentally erasing material which you