background image

 

E

4

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT. 
FULLY INSERT THE PLUG TO MAIN POWER SOCKET.  
 

 

 

SAVE THESE INSTRUCTIONS

 

COMPLIANCE WITH FCC REGULATIONS 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 

(1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that 

may cause undesired operation. 

NOTE: This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the 
user is encouraged to try to correct the interference by one or more of the following 
measures: 
-  Reorient or relocate the receiving antenna. 
-  Increase the separation between the equipment and receiver. 
-  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected. 

-  Consult the dealer or an experienced radio/TV technician for help. 

 

CAUTION:  Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate 
the equipment. 

 

CAUTION  

Follow the advice below for safe operations.  
ON PROTECTION AGAINST LASER ENERGY EXPOSURE  

 As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to 

disassemble the casing.  

Summary of Contents for SB2135

















Reviews: