OnAir 3000 Digital Mixing Console
Operation 5-71
Date printed: 31.10.08
SW V3.0
The console operator can listen to the conference by selecting
MPX MASTER
on
the monitoring/talkback module and adjusting the volume with the
SP
rotary
encoder (or on the GUI with the
MPX Master Volume
control). To talk to
the conference members the
MPX
key in the
TALKBACK
key field is used.
If switching the MPX conference off (e.g. by switching the members to a
program output or by deactivating the conference), the
ROUT - Bus Assign
page changes as follows:
Now, both conference members receive their normal N–X signals and con-
tribute to the corresponding masters.
CUE
The
CUE
function allows defining any 10 signals as cue sources both for the
control room and studio 1; this is configured using the configuration tool on
the
Desk Common - Cue Keys
page. Selection can be made from all inputs
and patch inputs, sums, and subgroups. These signals will then appear on the
10
CUE
buttons on the user GUI. Signals selected with them will be fed back
to the N–X buses instead of the normal N–X or conference signals, if the
CUE
button next to the corresponding N–X selector button is activated.
Full N–X Return
For special applications, an N–X bus may be configured in such a way that the
N–X owner can hear himself anyway. In order to do this, the channel rotary
encoder assignment must contain the N–X bus.
Summary of Contents for OnAir 3000
