manualshive.com logo in svg

Studer OnAir 3000, Operating Instructions Manual

The Studer OnAir 3000 is a professional-grade broadcasting console designed to enhance audio production. Discover its full potential by downloading the Operating Instructions Manual, a comprehensive guide for mastering the device. Access the manual for free at 88.208.23.73:8080, where you can conveniently download it to optimize your broadcasting experience.

Share
Download
background image

OnAir 3000 Digital Mixing Console

Operation  5-107

Date printed: 31.10.08

SW V3.0

5.12.1.3          Log System

                                                           Each mixer has its own internal log list that is automatically displayed on the 

Home 

page on the main screen if it contains one or more entries.

                                                           If a system message occurs, the diagnostics software manages the log  list 

which contains one entry for each system message, completed by time and 
date of occurrence.

                                                           If the log list contains more than one entry, the 

PREV 

and 

NEXT 

buttons 

appear on the 

Home 

page, allowing scrolling through the messages.

                                                           A user having access permission can accept warning and information entries; 

this causes the diagnostics software to remove the accepted entry from the log 
list. The log list is automatically cleared when the console is powered off.

                                                           Some entries in the log list need to be indicated immediately on their occur-

rence. A dialog box does this regardless of the currently selected page on the 
main screen. Each log list entry consists of:

                                                              •  Error text
                                                              •  Error type (information, warning, error)
                                                              •  Date and time of occurrence.
                                                              •  After a user has successfully logged in, a corresponding entry is made in 

the log file. 

                   

Central Error Logger

  The Central Error Logger is equipped with an improved Log Screen. The 

logger can also run as a Windows

®

 application. It collects all error messages 

centrally  and writes them to the log file. The new LogScreen allows an 
administrator loading and inspecting saved log files as well as checking the 
health state of the system by checking error logs in quasi real-time. Extensive 
filter functions allow focusing on particular error messages.

5.12.2      System Diagnostics 

                                                           System diagnostic is an application running in the background that detects 

error events in the system during power up and operation.

                           

During Power Up

  Items checked by the system diagnostics software at power up:

                                                              •  Hardware Devices
                                                              •  Communication
                                                              •  Configuration – Any difference to the hardware configuration before the 

last power down (i.e., missing or additional options) results in a warning 
or information message.

                           During Operation 

The system diagnostics software continuously observes the system during 
operation in order to detect the following conflicts: 

                                                              •  External sync clock loss
                                                              •  Power failure
                                                              •  Hot-plug hardware modification.
                                                              •  Correct function of the cooling fans (SW V3.0 and up; for D21m hubs or 

stage boxes, and for SCore Live units. 

Compact SCore not supported

).

                      Restricted Functions 

Usually, there is no indication of any error or warning if the execution of 
functions is prohibited in case of restrictions, because the user immediately 
notes whether the desired function is performed correctly. Nevertheless, some 
warnings need to be indicated to the user as a feedback, e.g. if a snapshot can-
not be saved to the ext. memory device due to insufficient memory space.

                                                           The means to indicate to the user a failure during function execution is a dialog 

box appearing always at the same position on the central screen. It displays a 
system message and will disappear when the user acknowledges the message 
by touching the 

OK

 or 

Accept

 button in the box. 

Summary of Contents for OnAir 3000





















































































































































































































































































































































































Reviews:

No comments

Related manuals for OnAir 3000

STS M2-H Operator'S Manual preview
M2-H
Brand: STS Pages: 71
C-Dax XC3 Operation Manual preview
XC3
Brand: C-Dax Pages: 39
Radio Shack 32-2057 Quick Start Manual preview
32-2057
Brand: Radio Shack Pages: 2
Mod CONTORTIONIST II Manual preview
CONTORTIONIST II
Brand: Mod Pages: 12
Radial Engineering Bones Holywood Owner'S Manual preview
Bones Holywood
Brand: Radial Engineering Pages: 2
OPFXS DIG DEEP User Manual preview
DIG DEEP
Brand: OPFXS Pages: 2
Behringer Europower PMP1000 Quick Start Manual preview
Europower PMP1000
Brand: Behringer Pages: 40
Rachel Allen RA-FM1 Instructions And Guarantee preview
RA-FM1
Brand: Rachel Allen Pages: 16
TREVIDEA G10087 User Manual preview
G10087
Brand: TREVIDEA Pages: 12
Amek 51 Media User Manual preview
51 Media
Brand: Amek Pages: 104
High End Hog iPC Manual preview
Hog iPC
Brand: High End Pages: 5
Electrolux Dito 601880 Brochure & Specs preview
Dito 601880
Brand: Electrolux Pages: 4
Electrolux Dito 601928 Brochure & Specs preview
Dito 601928
Brand: Electrolux Pages: 4
Toshiba Strata CTX Installation Manual preview
Strata CTX
Brand: Toshiba Pages: 24
Toshiba LICSTAR-IV SE Instruction Manual preview
LICSTAR-IV SE
Brand: Toshiba Pages: 262
Toshiba Strata CTX Programming Manual preview
Strata CTX
Brand: Toshiba Pages: 533
Euphonix System 5 Installation Manual preview
System 5
Brand: Euphonix Pages: 86
Rane Empath Operator'S Manual preview
Empath
Brand: Rane Pages: 8

Brands by name

Popular brands

Load more brands