background image

WARNING

!

Failure to follow these warnings and the assembly instructions could result in serious 
injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place 
additional padding under infant.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their 
backs to sleep, unless otherwise advised by your physician.

STRANGULATION HAZARD:

Strings can cause strangulation! Do not place items with a string around a child’s neck, 
such as hood strings or pacifier cords. Do not suspend strings over a crib or attach 
strings to toys.
To help prevent strangulation tighten all fasteners.  A child can trap parts of the body 
or clothing on loose fasteners.
DO NOT place crib near window where cords from blinds or drapes may strangle a 
child.

FALL HAZARD:

When child is able to pull to a standing position, set mattress to lowest position and 
remove bumper pads, large toys and other objects that could serve as steps for 
climbing out.
Stop using crib when child begins to climb out or reaches the height of 35 in. (89 cm.).
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, 
missing parts, or sharp edges before and after assembly and frequently during use. 

Securely tighten loose bolts and other fasteners. DO NOT use crib if any parts are 
missing, damaged or broken. Contact ducduc for replacement parts and instructional 
literature if needed. DO NOT substitute parts. 
If refinishing, use a non-toxic finish specified for children’s products.
Follow warnings on all products in a crib.
Never use plastic shipping bags or other plastic film as mattress covers because they 
can cause suffocation.
Infants can suffocate in gaps between crib sides and a mattress that is too small.

Summary of Contents for indi crib





















Reviews: